Using The Simple Pulser
1. Wrap each handhold withone layer of wet paper
towel. Place each on a
non-conductive surface,
like a plastic bag.
2. Connect the positive battery terminal to one handhold and
the negative terminal to the other handhold using alligator
clip leads.
3. Don't let the handholds touch.
4. Place a clock in front of you to time yourself.
5. Pick up the right handhold with your right hand.
6. Leave the left handhold on the table. Tap it with your left
hand, preferably the fleshy part of the palm. You may brace
yourself with your fingers on the plastic. Keep up a steady
pace as fast as you are able.
7. When you get tired pick up the left handhold with your left
hand and tap with your right hand. Keep changing off with
the least interruption.
8. Repeat a second time 20 minutes later, and a third time 20
minutes after that.
A single 9 volt battery will wear out rather quickly used this
way. Put two together, in parallel, for longer lasting power. This
requires two more short alligator clips. Connect positive terminals
of the batteries to each other, and the negatives also.
9 volt battery
2 short (12”) alligator clip leads (from
any electronics shop)
2 copper pipes, ¾ ” diameter, 4” long
(from a hardware store)
