Draw Circuits in orcad

(1) Place

i. VSIN from Source Library

ii. 1N4376 from Diode Library

iii. R from Analog Library

(2) Press Esc after placing a part to place other types

(3) Press “R” while placing a part to rotate it

(4) Double click on the part value to edit their values

􀃆 Part or click

VSIN: VOFF=0, VAMPL=1, FREQ=1000

(5) Place

(6) Place

􀃆 Ground or click and add “0/SOURCE”􀃆 Wire or click